<kuid2:210518:6540:1> Hicapyflat_17_Body

Тип: traincar
Опубликовано: 10.01.2021 18:37:30
Скачиваний: 12
Размер: 39.1 kB

Скачать

This is the body section (the pic shows the complete car) of an interactive articulated flat car with
four 4-wheel roller bearing bogeys. This is a generic version of my NASA_SRB cars for those who would like to use the
car for other loads and purposes. There is an attachment point (a.load0) in the center of the car. The generic lettering
can be changed by manipulating the size, color, and text values in the effects section of the config file. Many thanks to
Conn McCarthy for the use of his 36in 100t Trucks. Assemble this car in Surveyor as follows:
1. Place Hicapyflat_17_Body (this item) on the track.
2. Place Hicapyflat_17_F_Bolster on the track beyond one end of the body.
3. Place Hicapyflat_17_R_Bolster on the track beyond the other end of the car.
4. Rotate one bolster 180 degrees to get the coupler facing outward.
5. Move the bolsters under the ends of the body.
6. When properly assembled there will only be 1 red and 1 green arrow and the car will move as a unit.

config.txt:

kuid                                    <kuid2:210518:6540:1>
origin                                  "USA"
name                                    "Hicapyflat_17_Body"
kind                                    "traincar"
region                                  "USA"
mass                                    50000
engine                                  0
fonts                                   0
enginespec                              <kuid:-1:42004201>
bogey                                   <kuid:-10:149>
bogey-1                                 <kuid:-10:149>
kuid-table
{
  0                                     <kuid:-10:149>
}
obsolete-table
{
}
mesh-table
{
  default
  {
    mesh                                "Hicapyflat_17_Body.im"
    auto-create                         1
    effects
    {
      0
      {
        kind                            "name"
        fontsize                        0.2
        fontcolor                       255,255,255
        att                             "a.name0"
        name                            "C U S H I O N E D   L O A D"
      }
      1
      {
        kind                            "name"
        fontsize                        0.2
        fontcolor                       255,255,255
        att                             "a.name1"
        name                            "C U S H I O N E D   L O A D"
      }
      2
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       255,255,255
        att                             "a.name2"
        name                            "number"
      }
      3
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       255,255,255
        att                             "a.name3"
        name                            "number"
      }
      4
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       255,255,255
        att                             "a.name4"
        name                            "railroad"
      }
      5
      {
        kind                            "name"
        fontsize                        0.15
        fontcolor                       255,255,255
        att                             "a.name5"
        name                            "railroad"
      }
      6
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       255,255,255
        att                             "a.name6"
        name                            "CAPY 426000"
      }
      7
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       255,255,255
        att                             "a.name7"
        name                            "CAPY 426000"
      }
      8
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       255,255,255
        att                             "a.name8"
        name                            "LD LIMIT 526000"
      }
      9
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       255,255,255
        att                             "a.name9"
        name                            "LD LIMIT 526000"
      }
      10
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       255,255,255
        att                             "a.name10"
        name                            "LT WT 100000"
      }
      11
      {
        kind                            "name"
        fontsize                        0.05
        fontcolor                       255,255,255
        att                             "a.name11"
        name                            "LT WT 100000"
      }
    }
  }
}
queues
{
  load0
  {
    size                                1
    initial-count                       0
    attachment-points
    {
      0                                 "a.load0"
    }
  }
}
string-table
{
  maxweight                             200000
}
description                             "This is the body section (the pic shows the complete car) of an interactive articulated flat car with
four 4-wheel roller bearing bogeys. This is a generic version of my NASA_SRB cars for those who would like to use the
car for other loads and purposes. There is an attachment point (a.load0) in the center of the car. The generic lettering
can be changed by manipulating the size, color, and text values in the effects section of the config file. Many thanks to
Conn McCarthy for the use of his 36in 100t Trucks. Assemble this car in Surveyor as follows:
1.  Place Hicapyflat_17_Body (this item) on the track.
2.  Place Hicapyflat_17_F_Bolster on the track beyond one end of the body.
3.  Place Hicapyflat_17_R_Bolster on the track beyond the other end of the car.
4.  Rotate one bolster 180 degrees to get the coupler facing outward.
5.  Move the bolsters under the ends of the body.
6.  When properly assembled there will only be 1 red and 1 green arrow and the car will move as a unit."
trainz-build                            2.4
category-class                          "XFH"
category-region-0                       "US"
category-era-0                          "1980s"
category-era-1                          "1990s"
category-era-2                          "2000s"
asset-filename                          "Hicapyflat_17_Body"
username                                "Hicapyflat_17_Body"
folder-icon                             "6"
thumbnail                               
author                                  "Benjamin R. Dorsey"
organisation                            "None"
contact-email                           "www.bendorsey@bellsouth.net"
contact-website                         ""
license                                 "This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use."

Файлы:

black.bmp	3.1 kB
black.texture.txt	28 B
brass.bmp	822 B
brass.texture.txt	28 B
dark grey.bmp	12.1 kB
dark grey.texture.txt	32 B
hicapyflat_17_body.im	109.8 kB
light grey.bmp	822 B
light grey.texture.txt	33 B
Общий объём файлов:	126.6 kB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:210518:6540:1>	traincar	Hicapyflat_17_Body	2.4	10.01.2021 18:37:30	39.1 kB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid:-10:149>	#-10	bogey	Тележка_невидимая	0	18.04.2023 0:03:42	1.4 kB
Всего связей: 1, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет