A driver command to perform VELOCITY based custom coupling to a consist waiting along the way. The procedure is as follows: (1) Navigate from your train to the consist you want coupling by using Mutton's PATH rule and SETPATH commands. Make sure the signaling option is turned off in the setpath definition (otherwise, setpath request will never be granted due to the presence of a vehicle on the track). Optionally, you may also use ResetTrainDirection/SwitchDCCGear commands to correct the moving direction of your train at the beginning. (2) Apply VCouple command choosing the desired speed (between -10 and 10kph or -6mph and 6mph) from the menu to move the train to the consist for coupling. The command (driver schedule) ends once your train comes to a full stop after coupling.
VERSION: 1.0
FEATURES: The user can specify the velocity both in kph and mph units.
NOTES: This command supercedes the old VCouple V.0 driver schedule command. VCouple V.0 is not compatible with some of the commands with this pack. It is highly recommended to download the whole pack to eliminate such incompatibility issues.
Тип: Команда