<kuid:101046:105508> Interior for MP40PH-3C NMRX

Тип: Кабина
Опубликовано: 12.01.2021 22:47:20
Скачиваний: 98
Размер: 19.1 MB

Скачать

Interior for MP40PH-3C NMRX

config.txt:

username                                "Interior for MP40PH-3C NMRX"
kind                                    "interior"
cameradefault                           0
description                             "Interior for MP40PH-3C NMRX"
trainz-build                            3.5
author                                  "davesnow"
organisation                            "-"
contact-email                           "-"
contact-website                         "-"
category-region                         "AT"
category-era                            "2000s"
category-class                          "ZX"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow.


DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
cameralist
{
  camera0                               -1.083,-7.241,3.642,-6.298,-0.067
  camera1                               -1.042,-7.106,3.642,-7.446,-0.164
  camera2                               -1.042,-7.106,3.642,-5.876,-0
  camera3                               -0,-6.348,3.675,-6.196,-0
  camera4                               0.916,-6.929,3.641,-6.253,-0
  camera5                               0.828,-6.882,3.641,-5.209,-0.125
  camera6                               -1.294,-5.539,3.975,-5.87,-0.146
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "Cab_DES.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle.im"
    att                                 "a.throttle"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    auto-create                         1
    mousespeed                          -1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "train_brake.im"
    att                                 "a.trainbrake0"
    limits                              0,4
    angles                              -0.69,1.04
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_handle.im"
    att                                 "a.reverser"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          1
    auto-create                         1
  }
  speedo_needle2
  {
    kind                                "needle"
    mesh                                "speedo_needle.im"
    att                                 "a.speed0"
    limits                              0,43
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Independent_brake.im"
    att                                 "a.indbrake0"
    limits                              0,32
    angles                              -0.87,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "default"
  }
  horn
  {
    kind                                "button"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch"
    mesh                                "Switch_Headlights.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0.1,0.1
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "ampmeter_needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "Needle_White.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "Needle_Red.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "Needle_Red.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "Needle_White.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
}
kuid                                    <kuid:101046:105508>
kuid-table
{
}

Файлы:

cab art for interior 2.texture.txt	45 B
back wall.texture.txt	32 B
ampmeter_needle.im	688 B
cab art for interior 3.texture.txt	45 B
cab art for interior.texture.txt	43 B
cab art for interior 4.texture.txt	45 B
cab art for interior 5.texture.txt	45 B
$screenshot$.jpg	42.7 kB
cab_des.im	610.2 kB
fire extinguisher art.texture.txt	44 B
horn.im	13.3 kB
independent_brake.im	9.5 kB
interior one.texture.txt	35 B
fire extinguisher art.tga	768.0 kB
back wall.tga	4.0 MB
cab art for interior 5.tga	12.0 MB
cab art for interior 4.tga	12.0 MB
interior one.tga	12.0 MB
interior two-interior two.texture.txt	59 B
interior two.texture.txt	35 B
interior walls.texture.txt	37 B
needle_red.im	4.4 kB
reflection art landscaspe.texture.txt	48 B
needle_white.im	4.4 kB
mp40ph art.texture.txt	33 B
reverser_handle.im	5.3 kB
reflection art landscaspe.tga	768.0 kB
sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	574 B
sound / lever_5.wav	18.3 kB
sound / light_switch.wav	30.4 kB
sound / lever_2.wav	21.8 kB
sound / notch_1.wav	2.8 kB
sound / switch_6.wav	11.6 kB
sound / lever_4.wav	16.8 kB
sound / reverser.wav	10.4 kB
sound / throttle.wav	4.0 kB
sound / window.wav	74.0 kB
cab art for interior 2.tga	12.0 MB
speedo_needle.im	1.2 kB
switch.im	2.9 kB
switch_headlights.im	9.3 kB
throttle.im	10.6 kB
window glass art.texture.txt	39 B
train_brake.im	7.1 kB
window glass art.tga	768.0 kB
cab art for interior.tga	12.0 MB
interior walls.tga	12.0 MB
interior two.tga	16.0 MB
cab art for interior 3.tga	12.0 MB
mp40ph art.tga	12.0 MB
Общий объём файлов:	119.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:101046:105508>	interior	Interior for MP40PH-3C NMRX	3.5	12.01.2021 22:47:20	19.1 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid:101046:105503>	#101046	traincar	MP40PH-3C NMRX	3.5	12.01.2021 19:28:23	11.4 MB