<kuid2:95230:120383:3> DES Night Interior GE-U50 UP

Тип: Кабина
Опубликовано: 28.07.2023 13:18:12
Скачиваний: 48
Размер: 12.3 MB

Скачать

Interior for General Electric U50 lettered for Union Pacific.

Revision: {Final} Brake pressure needles a bit more accurate, better default Cab view, added working Dash Dials, completely reworked the texture files to look Good at Night,
adjusted the .im file for Night view, not to go completely dark at night, Added Night Interior.
Added Texture details to the Consoles, repaired the misaligned Graphics fonts, and textures.
Thank You to David Snow for the Beautiful Art Work on these assets.
Permission Allowed to Re-Skin and upload to the DLS.
Original Creator David Snow.

DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item.

config.txt:

username                                "DES Night Interior GE-U50 UP"
kind                                    "interior"
trainz-build                            3.7
category-class                          "ZI"
category-region                         "AT"
category-era                            "1950s"
interior-controls-type                  "full"
enable-shadows-in-cab                   1
description                             "Interior for General Electric U50 lettered for Union Pacific.

Revision: {Final} Brake pressure needles a bit more accurate, better default Cab view, added working Dash Dials, completely reworked the texture files to look Good at Night,
adjusted the .im file for Night view, not to go completely dark at night, Added Night Interior.
Added Texture details to the Consoles, repaired the misaligned Graphics fonts, and textures.
Thank You to David Snow for the Beautiful Art Work on these assets.
Permission Allowed to Re-Skin and upload to the DLS.
Original Creator David Snow.

DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
author                                  "David Snow---davesnow@sbcglobal.net"
license                                 "Freeware, all Licenses are to be Retained by DES-David Snow, the original owner"
cameradefault                           0
cameralist
{
  camera0                               -1.101,-10.501,3.94,-6.432,0
  camera1                               -1.101,-10.591,4.07,-7.421,-0
  camera2                               -1.281,-10.684,3.9,-9.138,-0
  camera3                               1.313,-10.523,3.923,-3.476,0
  camera4                               1.077,-10.959,4.05,-5.15,0
  camera5                               1.07,-10.981,3.95,-6.387,-0
  camera6                               -0.152,-10.472,4.01,-6.314,-0
  camera7                               -1.031,-10.294,4.11,-0,-0
}
mesh-table
{
  default
  {
    mesh                                "u50_interior_des.im"
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "speedo_needle.im"
    att                                 "a.speedo_needle"
    angles                              -0.08,5.6
    limits                              0,69
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "amp_needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,2.4
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "needle_red.im"
    att                                 "a.main_res_pressure"
    angles                              -0.6,11.18
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "needle_white.im"
    att                                 "a.equaliser_pressure"
    angles                              -0.6,3
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "needle_red.im"
    att                                 "a.brake_cyl_pressure"
    angles                              -0.6,5.67
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "needle_white.im"
    att                                 "a.brake_pipe_pressure"
    angles                              -0.6,5.6
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle.im"
    att                                 "a.throttle_lever0"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    radius                              0.35
    mousespeed                          -1
    auto-create                         1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "train_brake.im"
    att                                 "a.train_brake"
    limits                              0,4
    angles                              1.04,-0.69
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    mousespeed                          -1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_lever.im"
    att                                 "a.reverser"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         0,0,0
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "independent_brake.im"
    att                                 "a.independent"
    limits                              0,32
    angles                              0.69,-0.87
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_brake.im"
    att                                 "a.dynamic_brake"
    limits                              0,2
    angles                              0.73,-0.78
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch0"
    mesh                                "light_switch.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0,0
    auto-create                         1
  }
  window_right
  {
    kind                                "lever"
    mesh                                "window_right.im"
    att                                 "a.windowright"
    limits                              0,32
    angles                              0.014,-0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left
  {
    kind                                "lever"
    mesh                                "window_left.im"
    att                                 "a.windowleft"
    limits                              0,32
    angles                              -0,0.014
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:95230:120383:3>
kuid-table
{
}

Файлы:

sound
sound / cabin.txt	428 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / light_switch.wav	30.4 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
sound / air_horn_3.wav	177.1 kB
sound / window.wav	74.0 kB
amp_needle.im	1.3 kB
control stand art.texture.txt	40 B
interior art 1.texture.txt	37 B
interior control dials.texture.txt	45 B
light_switch.im	6.4 kB
needle colors.texture.txt	36 B
horn.im	15.5 kB
dynamic_brake.im	11.9 kB
needle_red.im	3.0 kB
needle_white.im	3.0 kB
reflection art.texture.txt	35 B
$screenshot$.jpg	42.1 kB
independent_brake.im	30.0 kB
reverser_lever.im	3.6 kB
side art 1.texture.txt	33 B
needle colors.tga	192.0 kB
speedo_needle.im	3.4 kB
reflection art.tga	192.0 kB
start panel & misc...texture.txt	43 B
throttle.im	8.2 kB
train_brake.im	7.4 kB
u50_interior_des.im	621.8 kB
white needle.texture.txt	59 B
window_left.im	4.8 kB
window_right.im	4.6 kB
white needle.tga	4.0 MB
start panel & misc...tga	12.0 MB
interior art 1.tga	12.0 MB
side art 1.tga	12.0 MB
control stand art.tga	12.0 MB
interior control dials.tga	12.0 MB
Общий объём файлов:	65.5 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:95230:120383:3>	interior	DES Night Interior GE-U50 UP	3.7	28.07.2023 13:18:12	12.3 MB
<kuid2:95230:120383:1>	interior	DES Interior for U50 UP	3.7	20.04.2023 12:23:38	9.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:95230:120373:1>	#95230	traincar	DES General Electric U50 Union Pacific V2	3.7	20.04.2023 12:23:39	10.1 MB
<kuid2:95230:120373:2>	#95230	traincar	DES General Electric U50 Union Pacific	3.7	28.07.2023 13:17:21	11.3 MB