<kuid2:95230:118656:3> DES Night Interior SD70ACe A&M

Тип: Кабина
Опубликовано: 28.07.2023 10:10:18
Скачиваний: 78
Размер: 19.8 MB

Скачать

Interior for AS70ACe The A&M.

DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item.

Revision: Corrected the Cabin Control errors due to the Trainz Log file errors regarding the Cabin Control Notch Height issues, adjusted Night illuminations, added Side Mirror Day Brightness, adjusted the .im file for night View, not to go completely dark at night, reworked the texture Files to look good at night,.
Added texture details to the Consoles, repaired the misaligned Graphics fonts, and textures.

Thank You to David Snow for the Beautiful Art Work on these assets.
Permission Allowed to Re-Skin and upload to the DLS.
Original Creator David Snow

config.txt:

username                                "DES Night Interior SD70ACe A&M"
kind                                    "interior"
trainz-build                            3.7
script                                  "gevocabin"
class                                   "GEVOCabin"
interior-controls-type                  "full"
enable-shadows-in-cab                   1
category-region                         "AT"
category-era                            "1990s;2000s"
category-class                          "ZI"
description                             "Interior for AS70ACe The A&M.

DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item.

Revision: Corrected the Cabin Control errors due to the Trainz Log file errors regarding the Cabin Control Notch Height issues, adjusted Night illuminations, added Side Mirror Day Brightness, adjusted the .im file for night View, not to go completely dark at night, reworked the texture Files to look good at night,.
Added texture details to the Consoles, repaired the misaligned Graphics fonts, and textures.

Thank You to David Snow for the Beautiful Art Work on these assets.
Permission Allowed to Re-Skin and upload to the DLS.
Original Creator David Snow"
author                                  "David Snow---davesnow@sbcglobal.net"
license                                 "Freeware, all Licenses are to be Retained by DES-David Snow, the original owner"
cameradefault                           0
cameralist
{
  camera0                               -1.105,-6.75,4.125,-0,-0
  camera1                               -1.076,-6.986,3.959,-1.109,0
  camera2                               -1.12,-6.928,4.243,-3.129,-0.106
  camera3                               0.69,-6.357,4.186,-6.273,0
  camera4                               0.415,-8.183,4.186,-6.233,0
  camera5                               0.29,-8.394,3.581,-7.466,-0.418
  camera6                               0,-8.571,3.461,-9.471,0
  camera7                               1.028,-6.976,4.106,-12.581,-0.181
  camera8                               1.136,-7.099,3.979,-11.463,-0
  camera9                               1.032,-7.02,4.156,-9.784,-0.139
  camera10                              -0.337,-6.191,4.265,-6.472,-0
}
mesh-table
{
  default
  {
    mesh                                "Interior.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.43,0.44
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
    radius                              0.37
    mousespeed                          -1
    auto-create                         1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Train_Brake_Lever.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              0.94,0
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    mousespeed                          -1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_lever.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         0,0,0
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "Independent_Brake_Lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0.94,0
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_brake_lever.im"
    att                                 "a.dynamic"
    limits                              0,2
    angles                              0,-0.7
    notches                             0,0.5,1
    notchheight                         0,0,0
    radius                              0.35
    auto-create                         1
    att-parent                          "default"
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "Horn_Lever.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  horn2
  {
    kind                                "button"
    mesh                                "horn.im"
    att                                 "a.horn0"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch0"
    mesh                                "Switch_HDlts.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0,0
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "digital-dial-spd"
    att                                 "a.digispeedo0"
    mesh                                "digitalreadout01.im"
    font                                "arial"
    fontsize                            0.01
    fontcolor                           255,255,255
    auto-create                         1
  }
  speedo_needle2
  {
    kind                                "needle"
    mesh                                "speedometer_needle.im"
    att                                 "a.speedo_needle0"
    limits                              0,33
    auto-create                         1
  }
  speedo_needle3
  {
    kind                                "digital-dial-spd"
    att                                 "a.digispeedo01"
    mesh                                "digitalreadout01.im"
    font                                "arial"
    fontsize                            0.02
    fontcolor                           150,0,100
    auto-create                         1
  }
  window_right_front
  {
    kind                                "lever"
    mesh                                "Window_Right_Front.im"
    att                                 "a.windowRtFt0"
    limits                              0,32
    angles                              0.0104,-0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_front
  {
    kind                                "lever"
    mesh                                "Window_Left_Front.im"
    att                                 "a.windowLfFt0"
    limits                              0,32
    angles                              -0.0104,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_right_rear
  {
    kind                                "lever"
    mesh                                "Window_Right_Back.im"
    att                                 "a.windowRtRr0"
    limits                              0,32
    angles                              -0.0107,0
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_rear
  {
    kind                                "lever"
    mesh                                "Window_Left_Back.im"
    att                                 "a.windowLfRr0"
    limits                              0,32
    angles                              0,0.0107
    notches                             0,1
    notchheight                         0,0
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid2:95230:118656:3>
kuid-table
{
}

Файлы:

sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	551 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / light_switch.wav	30.4 kB
sound / reverser.wav	10.4 kB
sound / throttle.wav	4.0 kB
sound / switch_6.wav	11.6 kB
sound / window.wav	74.0 kB
auto start decal.texture.txt	39 B
controls art 01.texture.txt	38 B
back wall accessories.texture.txt	44 B
alpha objects-alpha objects.texture.txt	61 B
cow catcher.texture.txt	34 B
$screenshot$.jpg	44.2 kB
decals.texture.txt	29 B
digitalreadout01.im	1.3 kB
digitalreadout02.im	1.3 kB
gevocabin.gs	620 B
horn.im	1.1 kB
dynamic_brake_lever.im	11.9 kB
independent_brake_lever.im	9.1 kB
horn_lever.im	10.7 kB
interior cab 01.texture.txt	38 B
auto start decal.tga	768.0 kB
alpha objects.tga	256.0 kB
interior cab 02.texture.txt	38 B
interior cab 03.texture.txt	38 B
interior cab 04.texture.txt	38 B
interior cab 02.tga	3.0 MB
interior walls cab.texture.txt	41 B
decals.tga	3.0 MB
loco art.texture.txt	31 B
reflection art.texture.txt	37 B
cow catcher.tga	4.0 MB
reverser_lever.im	7.2 kB
reflection art.tga	192.0 kB
side_mirror.texture.txt	34 B
side_mirror.tga	192.0 kB
switch_hdlts.im	7.3 kB
throttle_lever.im	12.0 kB
train_brake_lever.im	9.1 kB
speedometer_needle.im	2.5 kB
window art.texture.txt	33 B
interior.im	1.4 MB
window_left_back.im	3.3 kB
window_left_front.im	2.8 kB
window_right_back.im	3.5 kB
window_right_front.im	2.8 kB
back wall accessories.tga	12.0 MB
window art.tga	3.0 MB
controls art 01.tga	12.0 MB
interior walls cab.tga	12.0 MB
interior cab 04.tga	12.0 MB
interior cab 01.tga	12.0 MB
loco art.tga	12.0 MB
interior cab 03.tga	12.0 MB
Общий объём файлов:	100.2 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:95230:118656:3>	interior	DES Night Interior SD70ACe A&M	3.7	28.07.2023 10:10:18	19.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:95230:118403:8>	#95230	traincar	DES EMD SD70ACe A&M-70 V2	3.7	28.07.2023 10:09:22	10.3 MB