<kuid2:60238:38998:1> Swimming Pool 50 metres

Тип: scenery
Опубликовано: 20.10.2021 0:54:07
Скачиваний: 27
Размер: 2.4 MB

Скачать

A 50 metre swimming pool. Some of my models have attached figures to make them more interesting. You can change the figures that are called up or delete the effects container from the config file to remove the figures.
The pool uses a dighole for the parts below ground, the model will rotate in Surveyor but the dighole will not, this causes the hole to misalign with the model. If you wish it to be at 90 degrees to the default orientation, you will need to remove the dighole entry in this config table and make your own dighole in Surveyor to suit the new placement.

config.txt:

kuid                                    <kuid2:60238:38998:1>
light                                   1
kind                                    "scenery"
height-range                            -10,30
nightmode                               "lamp"
trainz-build                            3.5
category-class                          "bc"
snapmode                                1
dighole                                 6,4
mesh-table
{
  lod-0
  {
    mesh                                "pool_lod0.im"
    auto-create                         1
    lod-level                           0
    effects
    {
      stand0
      {
        kind                            "attachment"
        att                             "a.stand"
        default-mesh                    <kuid2:60238:38999:1>
      }
      figure0
      {
        kind                            "attachment"
        att                             "a.figure0"
        default-mesh                    <kuid2:60238:93000:1>
      }
      figure1
      {
        kind                            "attachment"
        att                             "a.figure1"
        default-mesh                    <kuid2:60238:93001:1>
      }
      figure2
      {
        kind                            "attachment"
        att                             "a.figure2"
        default-mesh                    <kuid2:60238:93002:1>
      }
      figure3
      {
        kind                            "attachment"
        att                             "a.figure3"
        default-mesh                    <kuid2:60238:93004:1>
      }
      figure4
      {
        kind                            "attachment"
        att                             "a.figure4"
        default-mesh                    <kuid2:60238:93011:1>
      }
      figure5
      {
        kind                            "attachment"
        att                             "a.figure5"
        default-mesh                    <kuid2:60238:93007:1>
      }
      figure6
      {
        kind                            "attachment"
        att                             "a.figure6"
        default-mesh                    <kuid2:60238:93002:1>
      }
      figure7
      {
        kind                            "attachment"
        att                             "a.figure7"
        default-mesh                    <kuid2:60238:93006:1>
      }
      figure8
      {
        kind                            "attachment"
        att                             "a.figure8"
        default-mesh                    <kuid2:60238:93004:1>
      }
      figure9
      {
        kind                            "attachment"
        att                             "a.figure9"
        default-mesh                    <kuid2:60238:93005:1>
      }
      figure10
      {
        kind                            "attachment"
        att                             "a.figure10"
        default-mesh                    <kuid2:60238:90948:1>
      }
      figure11
      {
        kind                            "attachment"
        att                             "a.figure11"
        default-mesh                    <kuid2:60238:93003:1>
      }
      figure12
      {
        kind                            "attachment"
        att                             "a.figure12"
        default-mesh                    <kuid2:60238:93003:1>
      }
      figure13
      {
        kind                            "attachment"
        att                             "a.figure13"
        default-mesh                    <kuid2:60238:93028:1>
      }
      figure14
      {
        kind                            "attachment"
        att                             "a.figure14"
        default-mesh                    <kuid2:60238:93025:1>
      }
      figure15
      {
        kind                            "attachment"
        att                             "a.figure15"
        default-mesh                    <kuid2:60238:93008:1>
      }
      figure16
      {
        kind                            "attachment"
        att                             "a.figure16"
        default-mesh                    <kuid2:60238:93009:1>
      }
      figure17
      {
        kind                            "attachment"
        att                             "a.figure17"
        default-mesh                    <kuid2:60238:93008:1>
      }
      figure18
      {
        kind                            "attachment"
        att                             "a.figure18"
        default-mesh                    <kuid2:60238:93000:1>
      }
      figure19
      {
        kind                            "attachment"
        att                             "a.figure19"
        default-mesh                    <kuid2:60238:93001:1>
      }
      figure20
      {
        kind                            "attachment"
        att                             "a.figure20"
        default-mesh                    <kuid2:60238:93005:1>
      }
      figure21
      {
        kind                            "attachment"
        att                             "a.figure21"
        default-mesh                    <kuid2:60238:93006:1>
      }
      figure22
      {
        kind                            "attachment"
        att                             "a.figure22"
        default-mesh                    <kuid2:60238:93012:1>
      }
      figure23
      {
        kind                            "attachment"
        att                             "a.figure23"
        default-mesh                    <kuid2:60238:93031:1>
      }
      figure24
      {
        kind                            "attachment"
        att                             "a.figure24"
        default-mesh                    <kuid2:60238:93030:1>
      }
      figure25
      {
        kind                            "attachment"
        att                             "a.figure25"
        default-mesh                    <kuid2:60238:93021:1>
      }
      figure26
      {
        kind                            "attachment"
        att                             "a.figure26"
        default-mesh                    <kuid2:60238:93025:1>
      }
      figure27
      {
        kind                            "attachment"
        att                             "a.figure27"
        default-mesh                    <kuid2:60238:93024:1>
      }
      figure28
      {
        kind                            "attachment"
        att                             "a.figure28"
        default-mesh                    <kuid2:60238:93010:1>
      }
    }
  }
  swimbox
  {
    mesh                                "swimbox.im"
    anim                                "swimbox.kin"
    animation-loop-speed                0.2
    auto-create                         1
    att-parent                          "lod-0"
  }
  swimmer
  {
    mesh                                "swimmer.im"
    anim                                "swimmer.kin"
    animation-loop-speed                0.8
    auto-create                         1
    att                                 "a.swimmer"
    att-parent                          "swimbox"
  }
  swimbox2
  {
    mesh                                "swimbox2.im"
    anim                                "swimbox2.kin"
    animation-loop-speed                0.3
    auto-create                         1
    att-parent                          "lod-0"
  }
  swimmer2
  {
    mesh                                "swimmer2.im"
    anim                                "swimmer2.kin"
    animation-loop-speed                1
    auto-create                         1
    att                                 "a.swimmer2"
    att-parent                          "swimbox2"
  }
  lod-1
  {
    mesh                                "pool_lod1.im"
    auto-create                         1
    lod-level                           1
  }
  default-night
  {
    mesh                                "night.im"
    night-mesh-base                     "lod-0"
  }
}
mesh-detail-level-count                 2
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
}
description                             "A 50 metre swimming pool. Some of my models have attached figures to make them more interesting. You can change the figures that are called up or delete the effects container from the config file to remove the figures.
The pool uses a dighole for the parts below ground, the model will rotate in Surveyor but the dighole will not, this causes the hole to misalign with the model. If you wish it to be at 90 degrees to the default orientation, you will need to remove the dighole entry in this config table and make your own dighole in Surveyor to suit the new placement."
username                                "Swimming Pool 50 metres"
author                                  "Ian Manion (Vulcan)"
organisation                            "Ianz Trainz"
contact-website                         "http://www.ianztrainz.com.au/index.html"
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)."
kuid-table
{
  stand                                 <kuid2:60238:38999:1>
  figure1                               <kuid2:60238:90948:1>
  figure2                               <kuid2:60238:93000:1>
  figure3                               <kuid2:60238:93001:1>
  figure4                               <kuid2:60238:93002:1>
  figure5                               <kuid2:60238:93003:1>
  figure6                               <kuid2:60238:93004:1>
  figure7                               <kuid2:60238:93005:1>
  figure8                               <kuid2:60238:93006:1>
  figure9                               <kuid2:60238:93007:1>
  figure10                              <kuid2:60238:93008:1>
  figure11                              <kuid2:60238:93009:1>
  figure12                              <kuid2:60238:93010:1>
  figure13                              <kuid2:60238:93011:1>
  figure14                              <kuid2:60238:93012:1>
  figure15                              <kuid2:60238:93021:1>
  figure16                              <kuid2:60238:93024:1>
  figure17                              <kuid2:60238:93025:1>
  figure18                              <kuid2:60238:93028:1>
  figure19                              <kuid2:60238:93029:1>
  figure20                              <kuid2:60238:93030:1>
  figure21                              <kuid2:60238:93031:1>
}

Файлы:

shadowblack.texture.txt	34 B
sign_lod1.im	2.2 kB
sign_lod0.im	2.4 kB
pool.texture.txt	27 B
beam2-beam2.texture.txt	45 B
night.im	3.8 kB
beam2.tga	17.0 kB
preview.jpg	22.1 kB
pool_lod1.im	66.1 kB
water.texture.txt	28 B
swimwear1.texture.txt	32 B
swimmer.kin	16.9 kB
swimmer2.kin	14.6 kB
swimbox.im	1.5 kB
swimmer2.im	72.3 kB
pool_lod0.im	222.6 kB
shadowblack.tga	1.8 kB
swimmer.im	75.0 kB
swimbox2.im	1.5 kB
swimbox.kin	42.4 kB
water.tga	769.0 kB
swimbox2.kin	42.4 kB
pool.tga	3.0 MB
swimwear1.tga	3.0 MB
Общий объём файлов:	7.3 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:60238:38998:1>	scenery	Swimming Pool 50 metres	3.5	20.10.2021 0:54:07	2.4 MB

Зависимости:

kuid	author	kind	name	build	date	size
<kuid2:60238:38999:1>	#60238	scenery	Sports Viewing Stand	3.5	18.10.2021 19:02:22	1.3 MB
<kuid2:60238:90948:1>	#60238	scenery	Figure Female Sitting 948	3.5	18.10.2021 19:57:00	9.2 kB
<kuid2:60238:93000:1>	#60238	scenery	Figure Swimmer Female 2100	3.5	20.10.2021 1:06:52	9.1 kB
<kuid2:60238:93001:1>	#60238	scenery	Figure Swimmer Female 2101	3.5	18.10.2021 18:43:40	28.9 kB
<kuid2:60238:93002:1>	#60238	scenery	Figure Swimmer Female 2102	3.5	20.10.2021 1:28:38	13.0 kB
<kuid2:60238:93003:1>	#60238	scenery	Figure Swimmer Female 2103	3.5	18.10.2021 18:36:19	26.8 kB
<kuid2:60238:93004:1>	#60238	scenery	Figure Swimmer Female 2104	3.5	18.10.2021 18:53:19	30.7 kB
<kuid2:60238:93005:1>	#60238	scenery	Figure Swimmer Female 2105	3.5	18.10.2021 18:42:52	28.7 kB
<kuid2:60238:93006:1>	#60238	scenery	Figure Swimmer Female 2106	3.5	18.10.2021 19:58:23	10.0 kB
<kuid2:60238:93007:1>	#60238	scenery	Figure Swimmer Female 2107	3.5	20.10.2021 1:06:24	9.0 kB
<kuid2:60238:93008:1>	#60238	scenery	Figure Swimmer Female 2108	3.5	20.10.2021 1:11:32	10.1 kB
<kuid2:60238:93009:1>	#60238	scenery	Figure Swimmer Female 2109	3.5	20.10.2021 1:10:38	9.9 kB
<kuid2:60238:93010:1>	#60238	scenery	Figure Swimmer Female 2110	3.5	20.10.2021 1:08:39	9.5 kB
<kuid2:60238:93011:1>	#60238	scenery	Figure Swimmer Female 2111	3.5	20.10.2021 1:20:09	11.9 kB
<kuid2:60238:93012:1>	#60238	scenery	Figure Swimmer Female 2112	3.5	18.10.2021 18:30:37	1.0 MB
<kuid2:60238:93021:1>	#60238	scenery	Figure Swimmer Male 2121	3.5	18.10.2021 19:57:00	9.3 kB
<kuid2:60238:93024:1>	#60238	scenery	Figure Swimmer Male 2124	3.5	18.10.2021 19:57:41	9.6 kB
<kuid2:60238:93025:1>	#60238	scenery	Figure Swimmer Male 2125	3.5	18.10.2021 19:59:34	11.1 kB
<kuid2:60238:93028:1>	#60238	scenery	Figure Swimmer Male 2128	3.5	18.10.2021 20:00:01	11.5 kB
<kuid2:60238:93029:1>	#60238	scenery	Figure Swimmer Male 2129	3.5	20.10.2021 1:10:53	10.0 kB
<kuid2:60238:93030:1>	#60238	scenery	Figure Swimmer Male 2130	3.5	20.10.2021 1:13:06	10.5 kB
<kuid2:60238:93031:1>	#60238	scenery	Figure Swimmer Male 2131	3.5	18.10.2021 19:59:48	11.3 kB
Всего связей: 22, неизвестных связей: 0

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет