<kuid2:60238:10010:1> Green Goat GG20B Interior BNSF

Тип: Кабина
Опубликовано: 18.10.2021 20:05:43
Скачиваний: 24
Размер: 3.2 MB

Скачать

An interior for the Green Goat GG20B Hybrid locomotive, similar to a GP9. This is the BNSF model.

config.txt:

kind                                    "interior"
camera                                  -1.058,0.522,0.887
script                                  "GG20BCabin"
class                                   "GG20BCabin"
kuid                                    <kuid2:60238:10010:1>
cameralist
{
  camera0                               -0.564,0.984,0.987,13.528,-0.137
  camera1                               0.451,-0.123,1.023,-6.189,-0.049
  camera2                               1.317,0.949,1.023,-13.501,-0.122
  camera3                               -1.058,0.522,0.887,0.1,-0.089
  camera4                               -1.382,0.78,0.987,6.592,-0.194
  camera5                               -1.361,0.923,1.137,6.902,-0.503
  camera6                               -0.618,0.715,1.023,-0.983,-0.234
  camera7                               -1.187,0.243,0.964,-3.106,-0.123
  camera8                               -1.312,-0.105,0.987,-6.145,-0.101
}
cameradefault                           3
category-keyword                        "greengoat;hybrid;gg20b;bnsf"
mesh-table
{
  default
  {
    mesh                                "gg_int.im"
    auto-create                         1
  }
  fan_switch
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_red.im"
    att                                 "a.switch0"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight0"
    att-parent                          "default"
  }
  switchlight0
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch0"
    auto-create                         0
    att-parent                          "default"
  }
  wiper_switch
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch_red.im"
    att                                 "a.switch1"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight1"
    att-parent                          "default"
  }
  switchlight1
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch1"
    auto-create                         0
    att-parent                          "default"
  }
  switch_3
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch.im"
    att                                 "a.switch2"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight2"
    att-parent                          "default"
  }
  switchlight2
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch2"
    auto-create                         0
    att-parent                          "default"
  }
  switch_4
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch.im"
    att                                 "a.switch3"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight3"
    att-parent                          "default"
  }
  switchlight3
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch3"
    auto-create                         0
    att-parent                          "default"
  }
  switch_5
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch.im"
    att                                 "a.switch4"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight4"
    att-parent                          "default"
  }
  switchlight4
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch4"
    auto-create                         0
    att-parent                          "default"
  }
  switch_6
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch.im"
    att                                 "a.switch5"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight5"
    att-parent                          "default"
  }
  switchlight5
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch5"
    auto-create                         0
    att-parent                          "default"
  }
  switch_7
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch.im"
    att                                 "a.switch6"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight6"
    att-parent                          "default"
  }
  switchlight6
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch6"
    auto-create                         0
    att-parent                          "default"
  }
  switch_8
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "switch.im"
    att                                 "a.switch7"
    limits                              0,1
    angles                              0,-2
    notches                             0,1
    notchheight                         0,0
    mousespeed                          -1
    radius                              0.05
    onlight                             "switchlight7"
    att-parent                          "default"
  }
  switchlight7
  {
    kind                                "light"
    mesh                                "switchlight.im"
    att                                 "a.switch7"
    auto-create                         0
    att-parent                          "default"
  }
  reverser_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "reverser_lever.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.55,-0.55
    notches                             0,0.5,1
    notchheight                         1,1,1
    att-parent                          "default"
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ind_brake_lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0,-2.1
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,2,2,2,2,2,2,2,2,2,1
    radius                              0.15
    att-parent                          "default"
  }
  trainbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "train_brake_lever.im"
    att                                 "a.train_brake_lever"
    limits                              0,4
    angles                              0,-2.4
    notches                             0,0.25,0.27,0.29,0.31,0.33,0.35,0.37,0.39,0.41,0.43,0.45,0.47,0.49,0.5,0.75,1
    notchheight                         1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1
    radius                              0.15
    att-parent                          "default"
  }
  throttle_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "throttle_lever.im"
    att                                 "a.thottle_lever"
    limits                              0,8
    angles                              1.2,0
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    att-parent                          "default"
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "dynamic_lever.im"
    att                                 "a.dynamic_brake"
    limits                              0,2
    angles                              0,-1.2
    notches                             0,0.5,1
    notchheight                         1,1,1
    radius                              0.35
    att-parent                          "default"
  }
  light_switch
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.light_switch"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,4.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    att-parent                          "default"
  }
  ampmeter_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "ampmeter_needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "whitepress_needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "redpress_needle.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "redpress_needle.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "whitepress_needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "whitepress_needle.im"
    att                                 "a.speedo"
    limits                              0,48
    att-parent                          "default"
  }
  speedo_needle2
  {
    kind                                "digital-dial-spd"
    att                                 "a.digispeedo"
    mesh                                "digital_dial.im"
    font                                "arial"
    fontsize                            0.02
    fontcolor                           225,60,0
    auto-create                         1
  }
  horn
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "horn.im"
    att                                 "a.horn"
    limits                              0,1
    angles                              0,-0.6
    notches                             0,1
    notchheight                         3,3
    radius                              0.16
    mousespeed                          -2
    att-parent                          "default"
  }
  wheelslip_light
  {
    kind                                "light"
    auto-create                         0
    mesh                                "wheelslip.im"
  }
  swivel_chair
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "chair.im"
    att                                 "a.chair1"
    limits                              0,8
    angles                              6.8,-6.8
    radius                              0.5
    mousespeed                          0.2
    att-parent                          "default"
  }
  dial0
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.dial0"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,3.8
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  dial1
  {
    kind                                "lever"
    auto-create                         1
    att                                 "a.dial1"
    mesh                                "dial.im"
    limits                              0,1
    angles                              0,3.8
    notches                             0,1
    notchheight                         0,0
    att-parent                          "default"
  }
  fan
  {
    mesh                                "fan.im"
    anim                                "fan.kin"
    auto-create                         1
    att                                 "a.fan"
    att-parent                          "default"
  }
  visor0
  {
    mesh                                "visor.im"
    auto-create                         1
    att                                 "a.visor0"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          -1
    limits                              0,1
    angles                              0,1.7
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
  }
  visor1
  {
    mesh                                "visor.im"
    auto-create                         1
    att                                 "a.visor1"
    att-parent                          "default"
    kind                                "lever"
    mousespeed                          -1
    limits                              0,1
    angles                              0,1.7
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         0,0,0,0,0,0,0,0,0
  }
  wipers
  {
    mesh                                "wipers.im"
    anim                                "wipers.kin"
    auto-create                         1
    att                                 "a.wipers"
    att-parent                          "default"
  }
}
thumbnails
{
  0
  {
    image                               "preview.jpg"
    width                               240
    height                              180
  }
}
username                                "Green Goat GG20B Interior BNSF"
trainz-build                            2.8
description                             "An interior for the  Green Goat GG20B Hybrid locomotive, similar to a GP9. This is the BNSF model."
author                                  "Ian Manion (Vulcan)"
organisation                            "Ianz Trainz"
contact-website                         "http://www.ianztrainz.com/index.html"
license                                 "This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)."
kuid-table
{
}

Файлы:

air_brake.im	544 B
air_brake.pm	720 B
ampmeter_needle.im	540 B
ampmeter_needle.pm	716 B
black.texture.txt	28 B
black.tga	786 B
black_handle-black_handle.texture.txt	59 B
black_handle.texture.txt	35 B
black_handle.tga	12.0 kB
body2.texture.txt	28 B
body2.tga	3.0 MB
brake01.texture.txt	30 B
brake01.tga	97.0 kB
brake02.texture.txt	30 B
brake02.tga	192.0 kB
bump_bnsf.texture.txt	78 B
bump_bnsf.tga	3.0 MB
chain4-chain4.texture.txt	47 B
chain4.bmp	3.1 kB
chain4.tga	5.0 kB
chair.im	10.2 kB
chair.pm	17.9 kB
chair_base.texture.txt	33 B
chair_base.tga	24.0 kB
checker_plate.texture.txt	36 B
checker_plate.tga	49.0 kB
copy of config.txt	18.0 kB
copy of gg20bcabin.gs	9.3 kB
copy of gg_int.im	438.1 kB
dash_back_ceiling.texture.txt	40 B
dash_back_ceiling.tga	384.0 kB
dash_bits.texture.txt	32 B
dash_bits.tga	769.0 kB
dash_dials.texture.txt	33 B
dash_dials.tga	192.0 kB
dash_dials_new.texture.txt	37 B
dash_dials_new.tga	193.0 kB
dial.im	536 B
dial.pm	716 B
digital_dial.im	1.3 kB
dynamic_lever.im	3.7 kB
dynamic_lever.pm	5.9 kB
engineer.texture.txt	31 B
engineer.tga	193.0 kB
env_glass.bmp	12.1 kB
env_glass.texture.txt	32 B
env_metal.bmp	12.1 kB
env_metal.texture.txt	32 B
exting_body.texture.txt	34 B
exting_body.tga	6.0 kB
exting_handle-exting_handle_op-exting_handle-exting_handle_op.texture.txt	95 B
exting_handle-exting_handle_op.texture.txt	122 B
exting_handle-exting_handle_op.tga	32.0 kB
fan.im	19.0 kB
fan.kin	15.9 kB
fan.texture.txt	26 B
fan.tga	49.0 kB
fan_grill-fan_grillop.texture.txt	104 B
fan_grill-fan_grillop.tga	64.0 kB
fan_grill.texture.txt	32 B
fan_grill.tga	48.0 kB
gg20bcabin.gs	9.3 kB
gg_int.im	622.2 kB
grey_glass.texture.txt	33 B
grey_glass.tga	13.0 kB
heater.texture.txt	29 B
heater.tga	96.0 kB
horn.im	5.1 kB
horn.pm	5.4 kB
ind_brake_lever.im	3.6 kB
ind_brake_lever.pm	6.2 kB
levers.texture.txt	29 B
levers.tga	24.0 kB
needle_red.texture.txt	33 B
needle_red.tga	3.0 kB
needle_white.texture.txt	35 B
needle_white.tga	3.0 kB
phone.texture.txt	28 B
phone.tga	24.0 kB
phonecord-phonecord_op-phonecord-phonecord_op.texture.txt	79 B
phonecord-phonecord_op.texture.txt	106 B
phonecord-phonecord_op.tga	32.0 kB
preview.jpg	20.2 kB
redpress_needle.im	540 B
redpress_needle.pm	716 B
red_handle.texture.txt	33 B
red_handle.tga	13.0 kB
reverser_lever.im	2.5 kB
reverser_lever.pm	4.7 kB
seat.texture.txt	27 B
seat.tga	48.0 kB
shadowblack.texture.txt	34 B
shadowblack.tga	812 B
sound
sound / air_horn_3.wav	177.1 kB
sound / cabin.txt	348 B
sound / lever_2.wav	21.8 kB
sound / lever_4.wav	16.8 kB
sound / lever_5.wav	18.3 kB
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
speedo_needle.pm	2.0 kB
switch.im	1.3 kB
switch.pm	2.0 kB
switch.texture.txt	29 B
switch.tga	1.5 kB
switchdial-switchdial_op.texture.txt	110 B
switchdial-switchdial_op.tga	16.0 kB
switchlight-switchlight_op.texture.txt	114 B
switchlight-switchlight_op.tga	1.0 kB
switchlight.im	552 B
switchlight.pm	728 B
switch_red.im	1.3 kB
switch_red.texture.txt	33 B
switch_red.tga	1.5 kB
throttle_lever.im	3.4 kB
throttle_lever.pm	5.9 kB
timber_handle-timber_handle.texture.txt	61 B
timber_handle.texture.txt	36 B
timber_handle.tga	13.0 kB
train_brake_lever.im	7.6 kB
train_brake_lever.pm	11.1 kB
visor.im	5.0 kB
visor.texture.txt	28 B
visor.tga	24.0 kB
wheelslip-wheelslip_op.texture.txt	106 B
wheelslip-wheelslip_op.tga	16.0 kB
wheelslip.im	544 B
wheelslip.pm	720 B
whitepress_needle.im	540 B
whitepress_needle.pm	716 B
wipers.im	16.6 kB
wipers.kin	13.4 kB
Общий объём файлов:	10.1 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid2:60238:10010:1>	interior	Green Goat GG20B Interior BNSF	2.8	18.10.2021 20:05:43	3.2 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
<kuid2:60238:9776:1>	#60238	traincar	Green Goat GG20B BNSF	2.8	18.10.2021 18:03:40	3.8 MB