<kuid:57443:100607> Interior for Muncy Valley GP38-2 - Phase II Red

Тип: Кабина
Опубликовано: 4.11.2021 11:39:10
Скачиваний: 36
Размер: 38.1 MB

Скачать

Interior for EMD GP38-2.

config.txt:

username                                "Interior for Muncy Valley GP38-2 - Phase II Red"
kind                                    "interior"
cameradefault                           0
description                             "Interior for EMD GP38-2."
trainz-build                            3.5
author                                  "davesnow"
organisation                            "-"
contact-email                           "-"
contact-website                         "-"
category-region                         "AT"
category-era                            "1950s"
category-class                          "ZX"
license                                 "This item is supplied free of charge for personal use by registered users of Trainz. It or its contents must not be modified, offered for sale or supplied as any part of a Payware package or provided for downloading on any site other than Auran unless this is expressly permitted in writing by the author davesnow / David E. Snow.


DISCLAIMER: It must be noted that this asset MAY or MAY NOT be prototypical. The author may have taken liberties in its creation such as re-coloring, moving, lengthening, shortening, re-designing, resizing, adding or deleting certain parts of the object, adding non-prototypical logos, etc, therefore there is no guarantee that the asset represents any known item."
cameralist
{
  camera0                               -1.189,-4.211,3.75,-0,-0
  camera1                               -1.189,-4.211,3.75,-0.93,-0.151
  camera2                               -1.189,-4.211,3.75,-2.843,-0
  camera3                               1.252,-4.169,3.75,-3.122,-0
  camera4                               1.065,-4.173,3.75,-5.242,-0.17
  camera5                               1.179,-4.152,3.699,-6.105,-0
  camera6                               0.464,-5.147,3.699,-6.141,-0
  camera7                               0.203,-3.689,3.791,-6.281,-0
}
obsolete-table
{
}
thumbnails
{
  0
  {
    image                               "$screenshot$.jpg"
    width                               240
    height                              180
  }
}
mesh-table
{
  default
  {
    mesh                                "Interior_dial_needles.im"
    auto-create                         1
  }
  throttle_lever
  {
    kind                                "lever"
    mesh                                "throttle_lever.im"
    att                                 "a.throttle_lever"
    limits                              0,8
    angles                              -0.61,0.69
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.35
    mousespeed                          -1
    auto-create                         1
  }
  trainbrakelap_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "trainbrake_handle.im"
    att                                 "a.trainbrake_handle"
    limits                              0,4
    angles                              1.04,-0.69
    notches                             0,0.25,0.5,0.75,1
    notchheight                         2,2,2,2,2
    mousespeed                          -1
  }
  dynamicbrake_lever
  {
    kind                                "lever"
    mesh                                "dynamic_handle.im"
    att                                 "a.dynamic"
    limits                              0,2
    angles                              0.73,-0.78
    notches                             0,0.5,1
    notchheight                         0.1,1
    mousespeed                          -1
    radius                              0.35
    auto-create                         1
  }
  reverser_lever
  {
    kind                                "lever"
    mesh                                "reverser_handle.im"
    att                                 "a.reverser_lever"
    limits                              0,2
    angles                              0.69,-0.69
    notches                             0,0.5,1
    notchheight                         1,1,1
    auto-create                         1
  }
  speedo_needle
  {
    kind                                "needle"
    mesh                                "speedometer_needle.im"
    att                                 "a.speedo_needle"
    limits                              0,40
    auto-create                         1
  }
  independantbrake_lever
  {
    kind                                "lever"
    auto-create                         1
    mesh                                "ind_brake_lever.im"
    att                                 "a.ind_brake_lever"
    limits                              0,32
    angles                              0.69,-0.87
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,2,2,2,2,2,2,2,1
    radius                              0.15
    mousespeed                          -1
    att-parent                          "default"
  }
  horn
  {
    kind                                "pulllever"
    mesh                                "horn.im"
    att                                 "a.horn"
    auto-create                         1
    angles                              -0,0.55
    limits                              0,1
    mousespeed                          -1
    radius                              -0.02
    notches                             0,1
    notchheight                         0,0
  }
  light_switch
  {
    kind                                "lever"
    att                                 "a.switch0"
    mesh                                "switch.im"
    limits                              0,1
    angles                              0,2
    notches                             1,0
    notchheight                         0.1,0.1
    auto-create                         1
  }
  ampmeter_needle
  {
    kind                                "needle"
    mesh                                "Amp_Needle.im"
    att                                 "a.ammeter"
    limits                              0,1500
    angles                              0,1.9
    auto-create                         1
    att-parent                          "default"
  }
  bploco_equaliser
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.equaliser_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bplocomain_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.main_res_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    kind                                "needle"
    mesh                                "red_needle.im"
    att                                 "a.brake_cyl_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    kind                                "needle"
    mesh                                "white_needle.im"
    att                                 "a.brake_pipe_pressure"
    limits                              0,1000
    auto-create                         1
    att-parent                          "default"
  }
  window_right_front
  {
    kind                                "lever"
    mesh                                "Window_Right_Front.im"
    att                                 "a.windowRtFt0"
    limits                              0,32
    angles                              0.0104,-0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_front
  {
    kind                                "lever"
    mesh                                "Window_Left_Front.im"
    att                                 "a.windowLfFt0"
    limits                              0,32
    angles                              -0.0104,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_right_rear
  {
    kind                                "lever"
    mesh                                "Window_Right_Rear.im"
    att                                 "a.windowRtRr0"
    limits                              0,32
    angles                              0.013,0
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
  window_left_rear
  {
    kind                                "lever"
    mesh                                "Window_Left_Rear.im"
    att                                 "a.windowLfRr0"
    limits                              0,32
    angles                              0,0.013
    notches                             0,1
    notchheight                         0.1,1
    mousespeed                          1
    radius                              0.35
    auto-create                         1
  }
}
kuid                                    <kuid:57443:100607>
kuid-table
{
}

Файлы:

alpha objects-alpha objects.texture.txt	61 B
brake cylinder textures.texture.txt	46 B
sound
sound / lever_4.wav	16.8 kB
sound / lever_2.wav	21.8 kB
sound / light_switch.wav	30.4 kB
sound / switch_6.wav	11.6 kB
sound / throttle.wav	4.0 kB
sound / cabin.txt	574 B
sound / notch_1.wav	2.8 kB
sound / reverser.wav	10.4 kB
sound / lever_5.wav	18.3 kB
sound / window.wav	74.0 kB
sound / air_horn_3.wav	177.1 kB
accessories art.texture.txt	38 B
interior art 4.texture.txt	37 B
coupler new art.texture.txt	38 B
amp_needle.im	1.3 kB
cow catcher.texture.txt	34 B
dynamic_handle.im	7.6 kB
decals-decals.texture.txt	47 B
ind_brake_lever.im	12.2 kB
$screenshot$.jpg	40.4 kB
alpha objects.tga	256.0 kB
interior control right.texture.txt	45 B
window_left_front.im	5.1 kB
window_right_front.im	12.8 kB
window_right_rear.im	5.1 kB
switch.im	6.4 kB
white_needle.im	4.6 kB
speedometer_needle.im	3.4 kB
window_left_rear.im	12.8 kB
trainbrake_handle.im	13.0 kB
throttle_lever.im	8.5 kB
radio & seats art.texture.txt	40 B
reverser_handle.im	7.6 kB
reflection art.texture.txt	37 B
red_needle.im	1.3 kB
loco art.texture.txt	31 B
reflection art.tga	768.0 kB
decals.tga	1.0 MB
interior control stand.texture.txt	45 B
interior walls.texture.txt	37 B
interior_dial_needles.im	857.5 kB
interior control dials.texture.txt	45 B
interior art 3.texture.txt	37 B
interior art 2.texture.txt	37 B
interior art 1.texture.txt	37 B
indies shell artwork.texture.txt	43 B
horn.im	15.5 kB
brake cylinder textures.tga	4.0 MB
coupler new art.tga	3.0 MB
accessories art.tga	3.0 MB
radio & seats art.tga	4.0 MB
cow catcher.tga	4.0 MB
interior art 2.tga	12.0 MB
interior art 1.tga	12.0 MB
indies shell artwork.tga	12.0 MB
interior control dials.tga	16.0 MB
interior walls.tga	12.0 MB
loco art.tga	12.0 MB
interior art 4.tga	16.0 MB
interior control stand.tga	16.0 MB
interior control right.tga	12.0 MB
interior art 3.tga	16.0 MB
Общий объём файлов:	157.4 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:57443:100607>	interior	Interior for Muncy Valley GP38-2 - Phase II Red	3.5	4.11.2021 11:39:10	38.1 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет