<kuid:10078:101563> кабина ТЭМ2УМ-169

Тип: Кабина
Опубликовано: 9.01.2021 19:41:51
Скачиваний: 57
Размер: 15.8 MB

Скачать

кабина ТЭМ2УМ-169

config.txt:

username                                "Кабина ТЭМ18Д-127"
kind                                    "interior"
category-era                            "2010s"
category-region                         "RU"
author                                  "3D Model:Dmitry 'Rokky' Belyaev"
contact-email                           "plazma_wc@rambler.ru"
contact-website                         "http://trainzup.com/"
description-ru                          "кабина ТЭМ2УМ-169"
description                             "cab TEM2UM-169"
username-ru                             "кабина ТЭМ2УМ-169"
license                                 "Creative Commons Attribution-NonCommercial-ShareAlike 4.0 Unported"
organisation                            "TrainzUp"
cameradefault                           0
category-class                          "ZI"
trainz-build                            3.7
cameralist
{
  camera0                               -1.21,5.225,3.184,0,0
  camera1                               1.218,5,3.184,0,0
  camera2                               -1.21,-5.225,3.184,0,0
  camera3                               1.218,-5,3.184,0,0
}
mesh-table
{
  default
  {
    mesh                                "tem15cab.im"
    auto-create                         1
  }
  throttle_lever
  {
    mesh                                "kontr_m.im"
    kind                                "lever"
    att                                 "a.km"
    auto-create                         1
    notches                             0,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1
    notchheight                         1,1,1,1,1,1,1,1,1
    radius                              0.1
    mousespeed                          -0.4
    angles                              0,2.2
    limits                              0,8
  }
  reverser_lever
  {
    mesh                                "reversor.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.reverser"
    limits                              0,2
    angles                              -0.2,0.2
    notches                             0,0.5,1
    notchheight                         1,1,1
    mousespeed                          1
  }
  trainbrake_lever
  {
    mesh                                "rucka394.im"
    kind                                "lever"
    auto-create                         1
    att                                 "a.kr394"
    limits                              0,4
    angles                              0,-2
    notches                             0,0.25,0.5,0.75,1
    notchheight                         0,0,0,0,0
    radius                              0.15
    att-parent                          "default"
    mousespeed                          -1
  }
  independantbrake_lever
  {
    mesh                                "rucka254.im"
    att                                 "a.kr254"
    auto-create                         1
    kind                                "lever"
    angles                              0,-2.9
    limits                              0,32
    att-parent                          "default"
    notches                             0,0.3,0.5,0.7,1
    notchheight                         1,2,2,2,1
    radius                              0.15
    test-collisions                     1
    mousespeed                          -1
  }
  nagruzka_generatora
  {
    mesh                                "amp_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.ampmeter_needle"
    limits                              0,2000
    angles                              0,1.7
    att-parent                          "default"
    value                               -2
  }
  napruga_generatora
  {
    mesh                                "amp_needle.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.v_g"
    limits                              0,1000
    angles                              0,1.7
    att-parent                          "default"
    value                               -2
  }
  bploco_equaliser
  {
    mesh                                "strelka.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bploco_equalizer"
    limits                              0,1600
    angles                              0,6.9
    att-parent                          "default"
  }
  bplocomain_needle
  {
    mesh                                "strelka.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bplocomain_needle"
    limits                              0,1600
    angles                              0,4.1
    att-parent                          "default"
  }
  bptrainbrakepipe_needle
  {
    mesh                                "strelka.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakepipe_needle"
    limits                              0,1600
    angles                              0,6.7
    att-parent                          "default"
  }
  bptrainbrakecylinder_needle
  {
    mesh                                "strelka.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.bptrainbrakecylinder_needle"
    limits                              0,1600
    angles                              0,6.8
    att-parent                          "default"
  }
  speedo_needle
  {
    kind                                "needle"
    auto-create                         1
    mesh                                "st_sl2m.im"
    att                                 "a.speedo_needle"
    limits                              0,48
    att-parent                          "default"
  }
  door_p
  {
    mesh                                "dver_p.im"
    kind                                "lever"
    att                                 "a.dver_p"
    auto-create                         1
    limits                              0,1
    angles                              0,1.3
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1
    radius                              0.15
    mousespeed                          1
  }
  door_z
  {
    mesh                                "dver_z.im"
    kind                                "lever"
    att                                 "a.dver_z"
    auto-create                         1
    limits                              0,1
    angles                              0,1.3
    notches                             0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1
    notchheight                         1,1,1,1,1,1,1,1,1,1,1
    radius                              0.15
    mousespeed                          1
  }
  swistok
  {
    mesh                                "swistok.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.swistok"
    limits                              0,1
    angles                              0,0.1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          -5
  }
  tifon
  {
    mesh                                "tifon.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tifon"
    limits                              0,1
    angles                              0,-0.1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          5
  }
  swistok1
  {
    mesh                                "swistok.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tifon_p"
    limits                              0,1
    angles                              0,0.1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          -5
  }
  tifon1
  {
    mesh                                "tifon.im"
    kind                                "pulllever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.swistok_p"
    limits                              0,1
    angles                              0,-0.1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          5
  }
  fortochka_m
  {
    mesh                                "fortochka_mash.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.fort_mash"
    limits                              0,1
    angles                              0,-0.54
    mousespeed                          2
  }
  fortochka_p
  {
    mesh                                "fortochka_poma.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.fort_poma"
    limits                              0,1
    angles                              0,-0.54
    mousespeed                          2
  }
  pr_tuskl
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  progector
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum01"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  m_v
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum02"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  a_upr_holod
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum03"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  g_voda_v_ohl
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum04"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  g_verh
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum05"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  g_vody
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum06"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  pusk_ost_d
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum07"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  top_nasos
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum08"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  upr_per
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum09"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  osv_pulta
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum10"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  pit_pr
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum11"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  ms_ns
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum12"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  stop_dis2
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum13"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  av_stop_d
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum14"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  sopr_isol
  {
    mesh                                "tumbler_m.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum15"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
  }
  upr_m
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum16"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  buf_z_pr
  {
    mesh                                "tumbler_m.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum17"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
  }
  buf_z_lev
  {
    mesh                                "tumbler_m.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum18"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
  }
  buf_p_pr
  {
    mesh                                "tumbler_m.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum19"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
  }
  buf_p_lev
  {
    mesh                                "tumbler_m.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum20"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
  }
  osv_a_k
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum21"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  alsn
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum22"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  racia
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum23"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  podramnoe
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum24"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  svet_nomer
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum25"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  osv_appar_cam
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum26"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  osv_holod_cam
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum27"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  osv_mash_pom
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum28"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  antiobledenitel
  {
    mesh                                "tumbler.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum29"
    limits                              0,1
    angles                              0,0.6
    notches                             0,1
    notchheight                         0,0
    mousespeed                          10
    radius                              1
  }
  osv_cab
  {
    mesh                                "tumbler_m.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.tum30"
    limits                              0,2
    angles                              0,0.5
    notches                             0,0.5,1
    notchheight                         0,0,0
    mousespeed                          10
    radius                              1
  }
  pr_sl2m
  {
    mesh                                "privod_sl2m.im"
    anim                                "privod_sl2m.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.privodsl2m"
  }
  als_0
  {
    mesh                                "alsn_green.im"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_1
  {
    mesh                                "alsn_yellow.im"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_2
  {
    mesh                                "alsn_k-g.im"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_3
  {
    mesh                                "alsn_red.im"
    att                                 "a.alsn"
    kind                                "light"
  }
  als_4
  {
    mesh                                "alsn_white.im"
    att                                 "a.alsn"
    kind                                "light"
  }
  ukbm_rb
  {
    mesh                                "rb.im"
    kind                                "pullrope"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.rb"
    limits                              0,1
    angles                              0,-0.004
    mousespeed                          15
  }
  epk
  {
    mesh                                "epk.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.epk"
    limits                              0,1
    angles                              0,4
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              1
  }
  maslo
  {
    mesh                                "st_P_masla.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo"
    limits                              0,10
    angles                              0,0.9
    att-parent                          "default"
    value                               -2
  }
  toplivo
  {
    mesh                                "st_P_masla.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.toplivo"
    limits                              0,10
    angles                              0,0.4
    att-parent                          "default"
    value                               -2
  }
  vea
  {
    mesh                                "st_P_masla.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.vea"
    limits                              0,10
    angles                              0,0.8
    att-parent                          "default"
    value                               -2
  }
  st_temp_v
  {
    mesh                                "st_temp_v.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.voda"
    limits                              0,100
    angles                              0,3.11
    att-parent                          "default"
    value                               -2
  }
  st_temp_m
  {
    mesh                                "st_temp_v.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.maslo_t"
    limits                              0,100
    angles                              0,3.11
    att-parent                          "default"
    value                               -2
  }
  st_temp_vvo
  {
    mesh                                "st_temp_v.im"
    auto-create                         1
    kind                                "needle"
    att                                 "a.voda_v"
    limits                              0,100
    angles                              0,3.11
    att-parent                          "default"
    value                               -2
  }
  g_v_v
  {
    mesh                                "galuzi/galuzi_vody_vosduha.im"
    anim                                "galuzi/galuzi_vody_vosduha.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.gal"
  }
  gal_vody
  {
    mesh                                "galuzi/galuzi_vody.im"
    anim                                "galuzi/galuzi_vody.kin"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.gal"
  }
  lamp_red
  {
    mesh                                "lamp_red.im"
    att-parent                          "default"
    att                                 "a.light1pos"
    kind                                "light"
    auto-create                         0
  }
  lamp_green
  {
    mesh                                "lamp_green.im"
    att-parent                          "default"
    att                                 "a.lightvent"
    kind                                "light"
    auto-create                         0
  }
  steklooch
  {
    mesh                                "vkl_dvor.im"
    kind                                "lever"
    auto-create                         1
    att-parent                          "default"
    att                                 "a.steklo"
    limits                              0,1
    angles                              0,1
    notches                             0,1
    notchheight                         1,1
    mousespeed                          10
    radius                              1
  }
  pomoh
  {
    mesh                                "pomoh/pomoha.im"
    anim                                "pomoh/pomoha.kin"
    animation-loop-speed                1
    auto-create                         1
    att                                 "a.pomoh"
  }
  zerkala
  {
    mesh                                "zerkala_tem18/zerkala.im"
    auto-create                         1
    att-parent                          "default"
  }
}
string-table
{
  throttle_lever                        "Контроллер"
  reverser_lever                        "Реверсор"
  trainbrake_lever                      "Кран машиниста"
  independantbrake_lever                "Тормоз локомотива"
  door_p                                ""
  door_z                                ""
  swistok                               "Свисток"
  tifon                                 "Тифон"
  swistok1                              "Свисток"
  tifon1                                "Тифон"
  fortochka_m                           ""
  fortochka_p                           ""
  pr_tuskl                              "Прожектор тускло"
  progector                             "Прожектор ярко"
  m_v                                   ""
  a_upr_holod                           "Управление холодильником"
  g_voda_v_ohl                          ""
  g_verh                                ""
  g_vody                                ""
  pusk_ost_d                            "Пуск дизеля"
  top_nasos                             "Топливный насос"
  upr_per                               "Управление переходом"
  osv_pulta                             "Освещение пульта ярко/тускло"
  pit_pr                                ""
  ms_ns                                 ""
  stop_dis2                             ""
  av_stop_d                             "Автостоп"
  sopr_isol                             ""
  upr_m                                 ""
  buf_z_pr                              "Правый задний БФ"
  buf_z_lev                             "Левый задний БФ"
  buf_p_pr                              "Правый передний БФ"
  buf_p_lev                             "Левый передний БФ"
  osv_a_k                               ""
  alsn                                  "АЛСН"
  racia                                 "Радиостанция"
  podramnoe                             ""
  svet_nomer                            "Подсветка номера"
  osv_appar_cam                         "Освещение колёсной пары"
  osv_holod_cam                         "Освещение холодильника"
  osv_mash_pom                          "Освещение"
  antiobledenitel                       "Антиобледенение"
  osv_cab                               "Освещение кабины ярко/тускло"
  ukbm_rb                               "РБ"
  epk                                   "Ключ ЭПК"
  steklooch                             "Стеклоочиститель"
}
thumbnails
{
  0
  {
    image                               "thumbnail.jpg"
    width                               240
    height                              180
  }
}
kuid                                    <kuid:10078:101563>
kuid-table
{
}

Файлы:

254-kran.jpg	165.8 kB
254-kran.texture.txt	29 B
394-kran.jpg	91.3 kB
394-kran.texture.txt	29 B
alsneng.gs	6.5 kB
alsn_green.im	2.9 kB
alsn_k-g.im	4.4 kB
alsn_red.im	2.9 kB
alsn_white.im	2.8 kB
alsn_yellow.im	2.9 kB
amp_needle.im	1.4 kB
bok.jpg	168.7 kB
bok.texture.txt	24 B
bok1.jpg	75.0 kB
bok1.texture.txt	25 B
detali.jpg	898.1 kB
detali.texture.txt	27 B
dverki.jpg	741.2 kB
dverki.texture.txt	27 B
dver_p.im	28.4 kB
dver_vvk.jpg	387.8 kB
dver_vvk.texture.txt	29 B
dver_z.im	28.4 kB
el_mano.jpg	276.5 kB
el_mano.texture.txt	28 B
epk.im	7.3 kB
fortochka_mash.im	21.7 kB
fortochka_poma.im	21.7 kB
galuzi
galuzi / galuzi.jpg	28.3 kB
galuzi / galuzi.texture.txt	29 B
galuzi / galuzi_verhnie.im	37.6 kB
galuzi / galuzi_verhnie.kin	5.8 kB
galuzi / galuzi_vody.im	256.1 kB
galuzi / galuzi_vody.kin	3.2 kB
galuzi / galuzi_vody_vosduha.im	83.8 kB
galuzi / galuzi_vody_vosduha.kin	2.9 kB
green alsn.texture.txt	33 B
green alsn.tga	12.0 kB
green.texture.txt	28 B
green.tga	48.0 kB
k-g alsn.texture.txt	31 B
k-g alsn.tga	12.0 kB
kontr.im	1.9 kB
kontr_m.im	19.5 kB
kresla.jpg	164.6 kB
kresla.texture.txt	27 B
lamp_alsn.texture.txt	32 B
lamp_alsn.tga	48.0 kB
lamp_green.im	4.9 kB
lamp_red.im	4.9 kB
opora_sl2m.jpg	59.7 kB
opora_sl2m.texture.txt	33 B
perednayay_stenka.jpg	287.2 kB
perednayay_stenka.texture.txt	38 B
pic.jpg	66.2 kB
plintus.jpg	63.5 kB
plintus.texture.txt	28 B
pol.jpg	168.3 kB
pol.texture.txt	24 B
pomoh
pomoh / casual02_m_25.jpg	2.6 MB
pomoh / casual02_m_25.texture.txt	36 B
pomoh / pomoha.im	183.2 kB
pomoh / pomoha.kin	836.7 kB
privod_sl2m.im	5.8 kB
privod_sl2m.kin	2.3 kB
pult.jpg	42.1 kB
pult.texture.txt	27 B
pult_light.im	29.8 kB
pult_pribory.jpg	651.9 kB
pult_pribory.texture.txt	33 B
rb.im	2.8 kB
red alsn.texture.txt	31 B
red alsn.tga	12.0 kB
red.texture.txt	26 B
red.tga	48.0 kB
reversor.im	2.9 kB
ruchnik.jpg	113.0 kB
ruchnik.texture.txt	28 B
rucka254.im	15.0 kB
rucka394.im	16.3 kB
sl-2m.jpg	200.6 kB
sl-2m.texture.txt	28 B
sl2m.wav	331.0 kB
sound
sound / 254.wav	2.5 kB
sound / cabin.txt	476 B
sound / ekstr395.wav	226.6 kB
sound / horn_start.wav	118.3 kB
sound / idle_1.wav	142.4 kB
sound / otpusk254.wav	63.5 kB
sound / otpusk395.wav	71.4 kB
sound / reverser.wav	17.9 kB
sound / sl2m.wav	290.1 kB
sound / stuk.wav	3.9 kB
sound / throttle.wav	5.7 kB
sound / tormoz395.wav	170.4 kB
sound / vkl.wav	5.4 kB
sound / zariad395.wav	86.9 kB
stekla-stekla.texture.txt	47 B
stekla.tga	1.0 MB
stol_dop.jpg	132.0 kB
stol_dop.texture.txt	31 B
stol_pulta.jpg	170.3 kB
stol_pulta.texture.txt	33 B
strelka.im	2.1 kB
st_p_masla.im	582 B
st_sl2m-st_sl2m_a.texture.txt	49 B
st_sl2m.im	1.3 kB
st_sl2m.jpg	38.8 kB
st_sl2m_a.bmp	384.1 kB
st_temp_v.im	582 B
swistok.im	12.3 kB
tem15cab.im	1.2 MB
tem15cabin.gs	17.2 kB
texture2.jpg	2.8 MB
texture2.texture.txt	31 B
throttle.im	60.2 kB
thumbnail.jpg	63.8 kB
tifon.im	12.3 kB
tifon_svistok.jpg	202.1 kB
tifon_svistok.texture.txt	36 B
tumbler.im	10.6 kB
tumbler_m.im	6.1 kB
tum_pult.jpg	744.8 kB
tum_pult.texture.txt	31 B
verh.jpg	359.6 kB
verh.texture.txt	25 B
vkl_dvor.im	1.5 kB
white alsn.texture.txt	33 B
white alsn.tga	12.0 kB
yashik1.jpg	31.7 kB
yashik1.texture.txt	47 B
yashik1.tga	4.0 MB
yellow alsn.texture.txt	34 B
yellow alsn.tga	12.0 kB
zadnyaya stenka.jpg	292.5 kB
zadnyaya stenka.texture.txt	38 B
zerkala_tem18
zerkala_tem18 / zerkala-zerkala.texture.txt	30 B
zerkala_tem18 / zerkala.im	519.0 kB
zerkala_tem18 / zerkala.tga	4.0 MB
Общий объём файлов:	26.5 MB

Версии элемента:

kuid	kind	name	build	date	size
<kuid:10078:101563>	interior	кабина ТЭМ2УМ-169	3.7	9.01.2021 19:41:51	15.8 MB

Зависимости:

kuid	author	kind	name	build	date	size
Нет

Зависимые элементы:

kuid	author	kind	name	build	date	size
Нет